Produced by the United States Hypertherm Powermax 1650 plasma machine is popular in the choice of thin material cutting, gouging can be an hour more than 10KG, it uses a dry plasma, single-gas process. Alternative is the MAX100, the cutting capacity, the vulnerability of life, the whole volume and other aspects are much better than MAX100. 

 Powermax1650 30-100 amps output current can be adjusted between the maximum output power of 16kw, low-cost compressed air or nitrogen can be used as a plasma gas source; automatic voltage input sensing allows the operator to the 200V-600V voltage ranges without the need for manual changes, power supply with automatic voltage regulator and amplifier can compensate the input voltage; with organic or hand-held cutting torch used both for the user to select the torch. Non-high boot arc; with quick disconnect torch; using a continuous arc controller switch guide for cutting metal or porous grid material; optional caster kit, the use of machine cutting torch with CNC interface. Hand-held torch, it uses a number of exclusive ownership of the technology, the occupation status in all respects, patented shielding technology that can easily drag cutting, easily controlled; a small error tolerance patented hafnium metal processing technology improve the life of wearing parts. Hand-held torch with T100 or T100M Machine torch. 

 Cutting Capacity 

 Machine torch (perforation thickness) 

 Recommended cutting capacity: 32mm 12mm 

 Maximum cutting capacity: 38mm 16mm 

 Cutting capacity: 44mm 

 Machine system, when the duty cycle of 100% in 90A, 80% for the 100A, the maximum production capacity of steel cut under the cutting speed 1193mm/min; handheld systems contained 80% suspense, the largest production capacity in the next low-carbon steel cutting speed 254mm/min. 



 Power Parameters 

 Input Voltage: 400V 3PH 50/60HZ 

 Input Current: 16KW output 400V 27A 

 Cut set rate: 40 ℃ @ 100A 400V 80%; 40 ℃ @ 90A 400V 100% 

 Output Voltage: 160VDC 

 Maximum open circuit voltage: 300VDC 

 Dimensions: Depth 671mm; width 427mm; height of 655mm; 

 Weight (with torch): 58kg 



 For gas 

 Plasma gas source: clean, dry, oil-free compressed air or nitrogen 

 Gas pressure: 7.5 m wire cutting torch, mobile state pressure 5.1bar above; 

 15 m wire cutting torch, mobile state pressure 5.4bar or more. 

 Gas Flow: 6.2bar pressure in the flow of 260 L / Min 



 Machine configuration 

 Handheld Systems :200-600V, 1/3PH, 50/60Hz automatic voltage regulator with 3 m cord in disguise 

 059275 Powermax1650 handheld cutting torch power cable with 7.5 m 

 059276 Powermax1650 hand power torch with 15 m wire 

 Machine Systems :200-600V, 1/3PH, 50/60Hz automatic voltage regulator with 3 m cord in disguise 

 059279 Powermax1650 machine cutting torch power cable with 7.5 m 

 059280 Powermax1650 machine cutting torch power cable containing 15 m